home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
fax
/
src
/
etc
/
config.ppi-pm14400fxmt
< prev
next >
Wrap
Text File
|
1994-08-01
|
2KB
|
41 lines
# $Header: /usr/people/sam/fax/etc/RCS/config.ppi-pm14400fxmt,v 1.5 1993/09/27 11:11:59 sam Rel $
#
# Config file for a Practical Peripherals PM14400FXMT
# Class 2 modem w/ firmware revision 2.17 or newer.
#
# CONFIG: CLASS2: *PM14400FXMT*
#
CountryCode: 1 # USA
LongDistancePrefix: 1
InternationalPrefix: 011
AreaCode: 415
DialStringRules: etc/dialrules
FAXNumber: +1.415.965.7824
ServerTracing: 1 # log server-related operations
SessionTracing: 11 # log server-related operations
RecvFileMode: 0600 # recvd facsimile are not public
LogFileMode: 0600 # private log files
DeviceMode: 0600 # device is accessible only to uucp/fax
#QualifyTSI: etc/tsi # accept facsimile from anyone
SpeakerVolume: off # machine's are already too loud
RingsBeforeAnswer: 1 # answer on first ring
#
ModemType: Class2
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: xonxoff # XON/XOFF flow control assumed
ModemFlowControlCmd: &K2 # set desired flow control method
ModemSetupDTRCmd: &D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: &C1 # setup so DCD reflects carrier (or not)
#GettyArgs: "std.%s -" # locked at receive rata (for SunOS)
#GettyArgs: "-h %l dx_%s" # requires modem to auto-detect fax/data
#
ModemDialCmd: DT%s # T for tone dialing
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
#
# Configuration parameters for Class 2 modems.
#
Class2BORCmd: BOR=2 # bit order for phase B/C/D (direct)
Class2RecvDataTrigger: "\022" # character sent to modem to start recv